Filter
Top Products
99-00984-20-B0
17 | CHAPTER 3 – USING YOUR UX60 PROJECTOR
To access or replace the
remote control battery
1. Turn over the remote control.
2. Hold down the side release on the
left side of the battery holder and pull
the battery holder completely out of
the remote control.
3. Insert a CR2025 coin cell battery into
the battery holder.
IMPORTANT
Remove the plastic sheet inside
the battery holder before you
insert the battery.
TIP
Make sure the positive (+) and negative (-)
signs on the battery terminals align with the
correct signs on the battery holder.
4. Re-insert the battery holder into
the remote control.