Filter
Top Products
99-00984-20-B0
77 | CHAPTER 6 – REMOTELY MANAGING YOUR SMART BOARD 685IX
INTERACTIVE WHITEBOARD SYSTEM
General Source Controls
The following source controls apply to all input sources. HDMI connector source
controls are completely described in this section. These controls are unavailable when
the projector is off. You can specify custom color values for all inputs.
Source Information Commands
These commands inform you of the current source settings. See page 94 for display
mode descriptions, page 96 for descriptions of the color setting commands, and
page 95 for descriptions of the remaining commands.
Source Control Commands
These commands control the appearance of your source. These settings are
unavailable when the projector is off, or when the source is disconnected.
Command Response
get displaymode displaymode=[current display mode setting]
get brightness brightness=[current brightness setting]
get contrast contrast=[current contrast setting]
get whitepeaking whitepeaking=[current whitepeaking setting]
get degamma degamma=[current degamma setting]
get red red=[current red color setting]
get green green=[current green color setting]
get blue blue=[current blue color setting]
get cyan cyan=[current cyan color setting]
get magenta magenta=[current magenta color setting]
get yellow yellow=[current yellow color setting]
get videofreeze videofreeze=[current video freeze setting]
get videomute videomute=[current video mute setting]
Command Command Target Range Response
set displaymode [target] =SMART Presentation
=Bright Classroom
=Dark Classroom
=sRGB
=User
displaymode=[target]
set brightness [value] Values between =0 and =100 brightness=[value]