Filter
Top Products
16 | CHAPTER 3 – USING YOUR UX60 PROJECTOR
99-00984-20-B0
12. 3.5 mm audio-input connector (for VGA 1 connector)
13. HD-DB15 (VGA 1) input connector (computer analog signal/component
video input)
14. 3.5 mm audio-input connector (reserved for wire management bundle)
15. HD-DB15 (VGA 2) input connector (reserved for wire management bundle)
16. RS-232 connector
17. RCA jack composite video input (reserved for ECP harness cable)
18. RCA jack audio-left input (reserved for ECP harness cable)
19. RCA jack audio-right input (reserved for ECP harness cable)
20. HDMI connector input
Remote Control
Remote Control Battery
Follow this procedure to use the remote control for the first time or to replace the
remote control battery.
WARNINGS
• Reduce the risk associated with a leaking battery in your projector’s remote
control:
– Use only the specified coin-cell type battery.
– Orient the battery’s plus (+) and minus (-) terminals according to the
markings on the remote control.
– Remove the battery when the remote control is unused for an extended
period.
– Do not heat, disassemble, short or recharge the battery, or expose it to
fire or high temperatures.
– Avoid eye and skin contact if the battery has a leak.
• Dispose of the exhausted battery and product components in accordance with
applicable regulations.