Filter
Top Products
99-00984-20-B0
85 | CHAPTER 6 – REMOTELY MANAGING YOUR SMART BOARD 685IX
INTERACTIVE WHITEBOARD SYSTEM
Network Control Commands
These commands control your network settings.
Simple Network Management Protocol
The UX60 projector supports a list of SNMP commands as described in the
management information base (MIB) file, available for download from
www2.smarttech.com/st/en-US/Support/FrontProjection/UX60MIB
.
The UX60 SNMP agent supports SNMP version 1. Upload the MIB file to your SNMP
management system application, and use it as described within your application’s
user guide.
Web Page Management
In addition to SNMP and RS232 controls, you can access advanced setup features
via the projector’s web page. This web page allows you to access and manage the
projector from a remote location using any computer connected to your intranet.
NOTE
To access the web page, your browser must support JavaScript™. Most
commonly used browsers, such as Internet Explorer® or Firefox®, support
JavaScript.
Command Command Target Range Response
set vgaoutnetenable [target] =on
=off
vgaoutnetenable=[current]
set dhcp [target] =on
=off
dhcp=[current]
set ipaddr [target] Values between =0.0.0.0
and =255.255.255.255
ipaddr=[current]
set subnetmask [target] Values between =0.0.0.0
and =255.255.255.255
subnetmask=[current]
set gateway [target] Values between =0.0.0.0
and =255.255.255.255
gateway=[current]
set primarydns [target] Values between =0.0.0.0
and =255.255.255.255
primarydns=[current]