62 | CHAPTER 5 – MAINTAINING AND TROUBLESHOOTING YOUR SMART BOARD
685ix INTERACTIVE WHITEBOARD SYSTEM
99-00984-20-B0
Occasional Maintenance Instructions
This section includes maintenance instructions for infrequent tasks.
Replacing the UX60 Projector’s Lamp Module
Eventually the lamp module will dim, and a message will appear reminding you to
replace the lamp. Make sure you have a replacement projector lamp before
proceeding with the following instructions.
WARNINGS
• This projector detects its remaining lamp life. Replace the lamp when a lamp
life warning message appears. If you continue to use the projector after the
replacement message appears, the lamp can shatter or burst, scattering
glass throughout the projector.
• If the lamp has shattered or burst:
– Wash your hands thoroughly if you have come into contact with
lamp debris.
– Do not touch the glass fragments because they can cause injury.
– Leave and then ventilate the area where the lamp shattered or burst.
– Thoroughly clean the area around the projector, and discard any edible
items placed in that area because they could be contaminated.
– Call an authorized SMART reseller
for instructions. Do not attempt to
replace the lamp.
• Replacing the lamp in a wall-mounted projector can result in a fall or injury.
Use caution when climbing a ladder, or remove the projector from the
wall-mounted bracket to replace the lamp.
• Uncovering the lamp while the projector is mounted on the wall-mounting
bracket can lead to product damage or personal injury from falling pieces of
glass if the lamp is broken.