Filter
Top Products
16 CHAPTER 1: LOGIN CONFIGURATION GUIDE
Network Diagram Figure 2 Telneting to the switch to configure console login
Networking and
Configuration
Requirements
As shown in Figure 2, telnet to the switch to configure console login. The current
user level is manage level (level 3).
Applicable Products
Configuration Procedure
■ Common configuration for console login
# Specify the level of commands accessible to the AUX 0 user interface to 2.
[3Com] user-interface aux 0
[3Com-ui-aux0] user privilege level 2
# Set the baud rate of the console port to 19200 bps.
[3Com-ui-aux0] speed 19200
# Set the number of lines that can be viewed on the screen of the AUX 0 user to
30.
[3Com-ui-aux0] screen-length 30
# Set the history command buffer size to 20 for AUX 0.
[3Com-ui-aux0] history-command max-size 20
# Set the idle-timeout time of AUX 0 to 6 minutes.
[3Com-ui-aux0] idle-timeout 6
■ Configure the authentication mode for console login
User PC running Telnet
Ethernet
Ethernet1/0/1
Product series Software version Hardware version
Switch 5500 Release V03.02.04 All versions
Switch 5500G Release V03.02.04 All versions
Switch 4500 Release V03.03.00 All versions
Switch 4210 Release V03.01.00 All versions