Filter
Top Products
Cluster Configuration 249
[3Com] ndp enable
[3Com] undo ndp enable intferface Ethernet 1/0/1
[3Com] interface Ethernet 1/0/1
[3Com-Ethernet1/0/1] undo ntdp enable
[3Com-Ethernet1/0/1] quit
# Enable NDP on Ethernet 1/0/2 and Ethernet 1/0/3.
[3Com] interface Ethernet 1/0/2
[3Com-Ethernet1/0/2] ndp enable
[3Com-Ethernet1/0/2] quit
[3Com] interface Ethernet 1/0/3
[3Com-Ethernet1/0/3] ndp enable
[3Com-Ethernet1/0/3] quit
# Set the holdtime of NDP information to 200 seconds.
[3Com] ndp timer aging 200
# Set the interval between sending NDP packets to 70 seconds.
[3Com] ndp timer hello 70
# Enable NTDP globally and on Ethernet 1/0/2 and Ethernet 1/0/3.
[3Com] ntdp enable
[3Com] interface Ethernet 1/0/2
[3Com-Ethernet1/0/2] ntdp enable
[3Com-Ethernet1/0/2] quit
[3Com] interface Ethernet 1/0/3
[3Com-Ethernet1/0/3] ntdp enable
[3Com-Ethernet1/0/3] quit
# Set the topology collection range to two hops.
[3Com] ntdp hop 2
# Set the delay for a member device to forward topology collection request to 150
ms.
[3Com] ntdp timer hop-delay 150
# Set the delay for a port of a member device to forward topology collection
request to 15 ms.
[3Com] ntdp timer port-delay 15
# Set the topology collection interval to three minutes.
[3Com] ntdp timer 3
# Enable the cluster function.
[3Com] cluster enable
# Enter cluster view.