Filter
Top Products
Configuring EAD 177
Networking and
Configuration
Requirements
As shown in Figure 47, a user host is connected to Ethernet 1/0/1 on the switch.
On the host runs the 802.1x client supporting 3Com EAD extended function. You
are required to configure the switch to use the RADIUS server for remote user
authentication and the security policy server for EAD control of users.
A CAMS server acts as the RADIUS server and another acts as the security policy
server.
Applicable Products
Configuration Procedure # Configure 802.1x on the switch.
Omitted
# Configure an ISP domain.
<3Com> system-view
[3Com] domain system
[3Com-isp-system] quit
# Configure a RADIUS scheme.
[3Com] radius scheme cams
[3Com-radius-cams] primary authentication 10.110.91.164 1812
[3Com-radius-cams] accounting optional
[3Com-radius-cams] key authentication expert
[3Com-radius-cams] server-type extended
# Specify the IP address of the security policy server.
[3Com-radius-cams] security-policy-server 10.110.91.166
# Associate the ISP domain with the RADIUS scheme.
[3Com-radius-cams] quit
[3Com] domain system
[3Com-isp-system] radius-scheme cams
Complete Configuration #
system-view
domain system
quit
#
radius scheme cams
primary authentication 10.110.91.164 1812
accounting optional
key authentication expert
server-type extended
security-policy-server 10.110.91.166
#
Product series Software version Hardware version
Switch 5500 Release V03.02.04 All versions
Switch 5500G Release V03.02.04 All versions
Switch 4500 Release V03.03.00 All versions