Filter
Top Products
Configuring SFTP 301
[3Com] ssh user client001 authentication-type password
# Specify the service type as SFTP.
[3Com] ssh user client001 service-type sftp
# Enable the SFTP server.
[3Com] sftp server enable
■ Configure the SFTP client (Switch A)
# Create a VLAN interface on the switch and assign an IP address for it. This
address must be in the same segment with the IP address of the VLAN interface on
switch B. In this example, configure it as 192.168.0.2.
<3Com> system-view
[3Com] interface vlan-interface 1
[3Com-Vlan-interface1] ip address 192.168.0.2 255.255.255.0
[3Com-Vlan-interface1] quit
# Connect to the remote SFTP server using the username client001 and password
abc to enter SFTP client view.
[3Com] sftp 192.168.0.1
Input Username: client001
Trying 192.168.0.1 ...
Press CTRL+K to abort
Connected to 192.168.0.1 ...
The Server is not authenticated. Do you continue access it? [Y/N]:y
Do you want to save the server’s public key? [Y/N]:n
Enter password:
sftp-client>
# Display the current directory of the server, delete the file z and verify the
deletion.
sftp-client> dir
-rwxrwxrwx 1 noone nogroup 1759 Aug 23 06:52 config.cfg
-rwxrwxrwx 1 noone nogroup 225 Aug 24 08:01 pubkey2
-rwxrwxrwx 1 noone nogroup 283 Aug 24 07:39 pubkey1
drwxrwxrwx 1 noone nogroup 0 Sep 01 06:22 new
-rwxrwxrwx 1 noone nogroup 225 Sep 01 06:55 pub
-rwxrwxrwx 1 noone nogroup 0 Sep 01 08:00 z
sftp-client> delete z
The following files will be deleted:
flash:/z
Are you sure to delete it?(Y/N):y
This operation may take a long time.Please wait...
File successfully Removed
sftp-client> dir
-rwxrwxrwx 1 noone nogroup 1759 Aug 23 06:52 config.cfg
-rwxrwxrwx 1 noone nogroup 225 Aug 24 08:01 pubkey2
-rwxrwxrwx 1 noone nogroup 283 Aug 24 07:39 pubkey1