Filter
Top Products
62 CHAPTER 11: MAC ADDRESS TABLE MANAGEMENT CONFIGURATION GUIDE
# Add a static MAC address entry.
[3Com] mac-address static 000f-e20f-dc71 interface Ethernet 1/0/2 vlan 1
# Set the aging time of dynamic MAC address entries on Switch to 500 seconds.
[3Com] mac-address timer aging 500
# Display the MAC address table configuration in system view.
[3Com] display mac-address interface Ethernet 1/0/2
MAC ADDR VLAN ID STATE PORT INDEX AGING TIME(s)
000f-e20f-dc71 1 Static Ethernet1/0/2 NOAGED
00e0-fc17-a7d6 1 Learned Ethernet1/0/2 AGING
00e0-fc5e-b1fb 1 Learned Ethernet1/0/2 AGING
00e0-fc55-f116 1 Learned Ethernet1/0/2 AGING
--- 4 mac address(es) found on port Ethernet1/0/2 ---
# Disable Ethernet 1/0/10 from learning MAC addresses dynamically, and add a
static MAC address entry. So that port Ethernet 1/0/10 can only send packets
destined for the NMS, and other hosts cannot communicate through this port.
[3Com] interface Ethernet 1/0/10
[3Com-Ethernet1/0/10] port access vlan 10
[3Com-Ethernet1/0/10] mac-address max-mac-count 0
[3Com-Ethernet1/0/10] mac-address static 0014-222c-aa69 vlan 10
Complete Configuration #
interface Ethernet1/0/2
port access vlan 10
mac-address static 000f-e20f-dc71 vlan 1
#
interface Ethernet1/0/10
mac-address max-mac-count 0
port access vlan 10
mac-address static 0014-222c-aa69 vlan 10
#
mac-address timer aging 500
Precautions ■ When you add a MAC address entry, the port specified by the interface
keyword must belong to the VLAN specified by the vlan keyword in the
command. Otherwise, the entry will not be added.
■ If the VLAN specified by the vlan keyword is a dynamic VLAN, adding a static
MAC address entry will make the VLAN become a static VLAN.