Filter
Top Products
Auto Detect Implementation in VLAN Interface Backup 73
Applicable Products
Configuration Procedure
■ Configure Switch A
# Enter system view.
<SwitchA> system-view
# Configure an IP address for VLAN-interface 1.
[SwitchA] interface vlan-interface 1
[SwitchA-Vlan-interface1] ip address 192.168.1.1 24
[SwitchA-Vlan-interface1] quit
# Configure an IP address for VLAN-interface 2.
[SwitchA] interface vlan-interface 2
[SwitchA-Vlan-interface2] ip address 192.168.3.1 24
[SwitchA-Vlan-interface2] quit
# Create detected group 10.
[SwitchA] detect-group 10
# Detect the reachability of 10.1.1.4, with the next hop being 192.168.1.2, and
the detecting number being 1.
[SwitchA-detect-group-10] detect-list 1 ip address 10.1.1.4 nexthop
192.168.1.2
[SwitchA-detect-group-10] quit
# Configure VLAN-interface 2 as the standby interface, which is enabled when the
detected group 10 is unreachable.
[SwitchA] interface vlan-interface 2
[SwitchA-Vlan-interface2] standby detect-group 10
■ Configure Switch C
# Enter system view.
<SwitchC> system-view
# Configure an IP address for VLAN-interface 2.
[SwitchC] interface vlan-interface 2
[SwitchC-Vlan-interface2] ip address 10.1.1.4 24
[SwitchC-Vlan-interface2] quit
# Configure an IP address for VLAN-interface 1.
Product series Software version Hardware version
Switch 5500 Release V03.02.04 All versions
Switch 5500G Release V03.02.04 All versions
Switch 4500 Release V03.03.00 All versions