3Com 5500 Switch User Manual


 
240 CHAPTER 26: XRN CONFIGURATION GUIDE
Fabric Cable Connection
n
You are recommended to connect the switches with cables after the configuration
in “Configuration Procedure” on page 241 “Configuration Procedure” on page
241.
Fabric cable connection mode of Switch 5500s
When building an XRN fabric of Switch 5500s, note the fabric cable connection
mode:
Multiple Switch 5500s are interconnected through their fabric ports.
A Switch 5500 has two fabric ports: left port and right port. Given a switch, its
left port is connected to the right port of another switch, and its right port is
connected to the left port of a third one.
n
On a Switch 5500, only four GigabitEthernet ports can be configured as fabric
ports. The four ports fall into two groups according to their port numbers
GigabitEthernet 1/1/1 and GigabitEthernet 1/1/2 form the first group.
GigabitEthernet 1/1/3 and GigabitEthernet 1/1/4 form the second group.
Only one group of ports can be configured as fabric ports at a time.
GigabitEthernet 1/1/1 and GigabitEthernet 1/1/3 are the left fabric ports of the
first and the second group respectively, and GigabitEthernet 1/1/2 and
GigabitEthernet 1/1/4 are the right fabric ports or the first and the second group
respectively.
An XRN fabric can be successfully built only when the fabric cables are connected
in the above mode.
Based on the networking requirements in Figure 71, interconnect the three
S3628P switches through their first group of fabric ports of as shown in the
following figure:
Figure 72 Switch 5500 fabric port connection mode
Fabric cable connection mode of Switch 5500Gs switches
When building an XRN fabric of Switch 5500Gs, note the fabric cable connection
mode:
Multiple Switch 5500Gs are interconnected through their fabric ports on their
rear panels.
Mode
Green=Speed
Yellow=Duplex
RPS
PWR
Console
Unit
1000Base
-
X
1
SpeedGreen=100MbpsYellow=10Mbps
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28
DuplxGreen=Full DuplxYellow=Half Duplx
H3C S3600
Series
10/100Base-TX
Mode
Green=Speed
Yellow=Duplex
RPS
PWR
Console
Unit
1000Base
-
X
1
SpeedGreen=100MbpsYellow=10Mbps
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28
DuplxGreen=Full DuplxYellow=Half Duplx
H3C S3600
Series
10/100Base-TX
Mode
Green=Speed
Yellow=Duplex
RPS
PWR
Console
Unit
1000Base
-
X
1
SpeedGreen=100MbpsYellow=10Mbps
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28
DuplxGreen=Full DuplxYellow=Half Duplx
H3C S3600
Series
10/100Base-TX