Filter
Top Products
316 CHAPTER 34: INFORMATION CENTER CONFIGURATION GUIDE
# Open the TFTPD32 application program on the Windows operating system as
shown in the following figure:
1 Current Directory indicates the directory of the log file syslog.txt. You can click
the Browse button to set it. In this example, the directory is D:ToolsTFTP.
2 Server interface indicates the IP address of the log host. It is 10.153.116.65 in
this example.
3 Select the syslog server tab.
# The system information with the required severity level will be output to the log
host as shown in the following figure:
# After receiving the system information, the log host will save it in the log file
syslog.txt under D:ToolsTFTP. You can view the saved system information as
shown in the following figure (the information in the blue colour is the L2INF
module trap information received by the log host):
Complete Configuration
#
info-center source L2INF channel 6
undo info-center source default channel 6
info-center loghost 10.153.116.65 channel 6