Filter
Top Products
Configuring Local Authentication for Telnet Users 173
radius scheme cams
primary authentication 192.168.1.19
primary accounting 192.168.1.19
secondary authentication 192.168.1.20
secondary accounting 192.168.1.20
key authentication expert
key accounting expert
user-name-format with-domain
server-type extended
#
domain abc
radius-scheme cams
vlan-assignment-mode integer
quit
#
domain default enable abc
#
interface Ethernet 1/0/3
dot1x port-method portbased
dot1x guest-vlan 10
#
dot1x
#
interface Ethernet 1/0/3
dot1x
Precautions The above describes only the configurations on the switch. Configurations like
adding users and configuring VLAN assignment on the RADIUS server are omitted.
Configuring Local
Authentication for
Telnet Users
In local authentication mode, user information including the username, password
and related attributes are stored in the switch. Local authentication features high
speed and low cost, but the amount of stored information depends on the
hardware capacity.
Network Diagram
Figure 45 Network diagram for configuring local authentication for Telnet users
Networking and
Configuration
Requirements
As shown in Figure 45, you are required to configure the switch so that Telnet
users logging into the switch are authenticated locally by the switch.
Applicable Products
Internet
Switch
Telnet user
Product series Software version Hardware version
Switch 5500 Release V03.02.04 All versions
Switch 5500G Release V03.02.04 All versions
Switch 4500 Release V03.03.00 All versions
Switch 4210 Release V03.01.00 All versions