Filter
Top Products
292 CHAPTER 32: SSH CONFIGURATION GUIDE
authentication-mode scheme
protocol inbound ssh
■ Configure Switch A
#
interface Vlan-interface1
ip address 10.165.87.137 255.255.255.0
#
Precautions None
Configuring the
Switch to Act as the
SSH Client and Use
RSA Authentication
Network Diagram Figure 99 Network diagram for configuring the switch to act as the SSH client and use
RSA authentication
Networking and
Configuration
Requirements
In scenarios where users log into a switch over an insecure network by using
another switch, SSH can be used to ensure the security of data exchange to the
maximum extent. As shown in Figure 99:
■ Switch A acts as the SSH client and the login username is client001.
■ Switch B acts as the SSH server, whose IP address is 10.165.87.136.
■ RSA authentication is required.
Applicable Products
Configuration Procedure
■ Configure Switch B
# Create a VLAN interface on the switch and assign an IP address for it. The SSH
client will use this address as the destination for SSH connection.
<3Com> system-view
[3Com] interface vlan-interface 1
[3Com-Vlan-interface1] ip address 10.165.87.136 255.255.255.0
[3Com-Vlan-interface1] quit
# Generate an RSA key pair.
SSH server SSH client
Switch B Switch A
Vlan-int1
10.165.87.136/24
Vlan-int1
10.165.87.137/24
Product series Software version Hardware version
Switch 5500 Release V03.02.04 All versions
Switch 5500G Release V03.02.04 All versions
Switch 4500 Release V03.03.00 All versions
Switch 4210 Release V03.01.00 All versions