Filter
Top Products
328 CHAPTER 36: REMOTE-PING CONFIGURATION GUIDE
Configuration procedure
# Enable the Remote-ping client.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] remote-ping-agent enable
# Create a Remote-ping test group, configuring the administrator name as
administrator and test operation tag as ICMP.
[3Com] remote-ping administrator icmp
# Configure the test type as ICMP.
[3Com-remote-ping-administrator-icmp] test-type icmp
# Configure the destination IP address as 10.2.2.2.
[3Com-remote-ping-administrator-icmp] destination-ip 10.2.2.2
# Configure the number of probes in one test as 10.
[3Com-remote-ping-administrator-icmp] count 10
# Configure the probe timeout time as 5 seconds.
[3Com-remote-ping-administrator-icmp] timeout 5
# Start the test.
[3Com-remote-ping-administrator-icmp] test-enable
# View the test results.
[3Com-remote-ping-administrator-icmp] display remote-ping results ad
ministrator icmp
[3Com-remote-ping-administrator-icmp] display remote-ping history ad
ministrator icmp
For detailed output description, see the corresponding command manual.
Complete configuration
Configuration on Switch A.
#
remote-ping-agent enable
remote-ping administrator icmp
test-type icmp
destination-ip 10.2.2.2
count 10
timeout 5
Precautions
None