Filter
Top Products
30 CHAPTER 4: VOICE VLAN CONFIGURATION GUIDE
■ As the OUI address of IP phone 2 is not in the default voice device vendor OUI
list of the switch, you need to add its OUI address 000f-2200-0000. In addition,
configure its description as IP Phone2.
Applicable Products
Configuration Procedure # Create VLAN 2 and VLAN 6.
<SwitchA> system-view
[SwitchA] vlan 2
[SwitchA-vlan2] quit
[SwitchA] vlan 6
[SwitchA-vlan6] quit
# Set the aging time for the voice VLAN.
[SwitchA] voice vlan aging 100
# Add 000f-2200-0000 to the OUI address list and configure its description as IP
Phone2.
[SwitchA] voice vlan mac-address 000f-2200-0000 mask ffff-ff00-0000
description IP Phone2
# Configure VLAN 2 as the voice VLAN.
[SwitchA] voice vlan 2 enable
# Set the voice VLAN operation mode on Ethernet 1/0/1 to automatic. This step is
optional, because the default operation mode of the voice VLAN is automatic.
[SwitchA] interface Ethernet 1/0/1
[SwitchA-Ethernet1/0/1] voice vlan mode auto
# Configure Ethernet 1/0/1 as a trunk port.
[SwitchA-Ethernet1/0/1] port link-type trunk
# Set VLAN 6 as the default VLAN of Ethernet 1/0/1 and configure Ethernet 1/0/1
to permit the packets of VLAN 6 to pass through. (PC data will be transmitted in
the VLAN.)
[SwitchA-Ethernet1/0/1] port trunk pvid vlan 6
[SwitchA-Ethernet1/0/1] port trunk permit vlan 6
# Enable voice VLAN on Ethernet 1/0/1.
[SwitchA-Ethernet1/0/1] voice vlan enable
n
■ After the configuration above, PC data is automatically assigned to the default
VLAN of Ethernet 1/0/1 (namely the service VLAN) for transmission. When IP
Product series Software version Hardware version
Switch 5500 Release V03.02.04 All versions
Switch 5500G Release V03.02.04 All versions
Switch 4500 Release V03.03.00 All versions