Open as PDF
11. Configurator, Communication settings
How to set a DMX address
1. Click on the up down control of the spin box until the desired address is obtained.
click on the input ﬁeld, select the current value and enter a new value with the keyboard.
2. Click Apply.
11.3.2 DMX mode
What are the possibilities ?
3 modes for DMX are available:
• Basic mode which has currently 2 channels implemente
• Extended mode which has currently 10 channels implemented.
• Full mode which has currently 9 channels implemented and a 10th free channel.
Depending on the application, the correct DMX mode has to be selected.
R5976924 PROJECTOR TOOLSET 16/04/2009 171