Barco R5976924 Projector User Manual

12. Configurator, Warping
About warping
Type of warping selection
Warp with commands
Warp via User interface
12.1 About warping
Image warping is the process of digitally manipulating an image to compensate for the distortion of the
screen. Consequently, it can also be used to generate an image with irregular shape.
While an image can be transformed in various ways, pure warping doesn’t affect the colors.
Some examples of warped images, using the warp geometry settings:
Image 12-1
Example 1 : distorted image
Image 12-2
Example 2 : distorted image
Creation of warping settings
Warping settings can be created via Warping commands which are directly send to selected device(s) or
via a warp user interface which allows to manipulate almost any point on any place in the image so that
the desired image is displayed. The settings created via the user interface can be stored in a le and this
le can be downloaded in the selected device(s). Once the le is downloaded it can be recalled via DMX
channel 56. For more info, consult the user guide of the DML.
12.2 Type of warping selection
How to make the selection
1. While in the Warping tab page, click on the corresponding button.
For warping with commands, click on Warp with Commands.
For warping via the user interface, click on Warp with UI.
R5976924 PROJECTOR TOOLSET 16/04/2009