Open as PDF
12. Configurator, Warping
Delete warp ﬁle
12.4.5 Activate warp ﬁle
What can be done ?
Awarpﬁle stored on the projector can be activated and is loaded in the warp board as the new settings.
How to activate
1. While Warp with UI is selected, click on Activate Warp ﬁles on projector (1). (image 12-16)
The Activate warp co nﬁ guration window opens.
2. Click on the ﬁle to activate (3).
3. Click on Activate warp conﬁguration (4).
The selected warp ﬁle is activated. The name in current active ﬁle changes to the new selected name.
R5976924 PROJECTOR TOOLSET 16/04/2009