Barco R5976924 Projector User Manual

3. Menus
3.8.1 About snapshots
At any moment the settings for a conguration can be saved in a snapshot le. This snapshot le can be
loaded again to create the same situation as when the snapshot was taken.
A snapshot can contain:
All settings
All layout settings
All input settings
Lamp settings
Projector settings
A snapshot is a collection of settings at a given point of time for a conguration
3.8.2 Managing snapshots
When opening the snapshot window an overview of all available snapshots is given. A snapshot le is
built up as a tree of settings.
To open this tree of settings, click on the ’+’ sign to expand a branch.
A yellow warning symbol in front of the snapshot name means that something inside the snapshot does
not correspond with the current active conguration. Expand the snapshot tree to see the differences.
Such a snapshot can be applied to the current conguration but only the corresponding setting are loaded
and for the other settings, the current values remain in place.
Some examples when a warning symbol can be displayed:
projector not (anymore) in the conguration
inputs on projector are swapped, or missing.
When a snapshot is selected, the name of the snapshot is yellow.
R5976924 PROJECTOR TOOLSET 16/04/2009