Filter
Top Products
2-79
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 2 Content Switching Module with SSL Commands
redirect-vserver (real server submode)
redirect-vserver (real server submode)
To configure a real server to receive traffic redirected by a redirect virtual server, use the
redirect-vserver command in the SLB real server configuration submode. To specify that traffic is not
redirected to the real server, use the no form of this command.
redirect-vserver name
no redirect-vserver
Syntax Description
Defaults Traffic is not redirected to the server.
Command Modes SLB real server configuration submode
Command History
Usage Guidelines Mapping real servers to redirect virtual servers provides persistence for clients to real servers across TCP
sessions. Before using this command, you must create the redirect virtual server in serverfarm submode
with the redirect-vserver command.
Examples This example shows how to map a real server to a virtual server:
Cat6k-2(config-slb-sfarm)# real 10.2.2.1
Cat6k-2(config-slb-real)# redirect-vserver timely
Related Commands real
redirect-vserver
show module csm real
show module csm vserver redirect
name Name of the virtual server that has its requests redirected.
Release Modification
CSM release 1.1(1) This command was introduced.
CSM-S release 1.1(1) This command was introduced.