Filter
Top Products
2-81
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 2 Content Switching Module with SSL Commands
redirect-vserver
redirect-vserver
To specify the name of a virtual server to receive traffic redirected by the server farm, and then enter
redirect virtual server configuration submode, use the redirect-vserver command. To remove the
redirect virtual server, use the no form of this command.
redirect-vserver name
no redirect-vserver name
Syntax Description
Defaults This command has no default settings.
Command Modes SLB serverfarm configuration submode
Command History
Examples This example shows how to name the virtual server:
Cat6k-2(config-slb-sfarm)# redirect-vserver quantico
Related Commands real
redirect-vserver (real server submode)
script task
show module csm serverfarm
show module csm vserver redirect
name Name of the virtual server to receive traffic redirected by the server
farm; the virtual server name can be no longer than 15 characters.
Release Modification
CSM release 1.1(1) This command was introduced.
CSM-S release 1.1(1) This command was introduced.