Filter
Top Products
3-20
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 3 Commands Specific to the Content Switching Module with SSL
debug ssl-proxy
debug ssl-proxy
To turn on the debug flags in different system components, use the debug ssl-proxy command. Use the
no form of this command to turn off the debug flags.
debug ssl-proxy {app | fdu [type] | ipc | pki [type] | ssl [type] | tcp [type]}
Syntax Description
Defaults This command has no default settings.
Command Modes EXEC
Command History
Usage Guidelines The fdu type includes the following values:
• cli—Debugs the FDU CLI.
• hash—Debugs the FDU hash.
• ipc —Debugs the FDU IPC.
• trace—Debugs the FDU trace.
app Turns on App debugging.
fdu type Turns on FDU debugging; (optional) type valid values are cli, hash, ipc,
and trace. See the “Usage Guidelines” section for additional information.
ipc Turns on IPC debugging.
pki type Turns on PKI debugging; (optional) type valid values are cert, events,
history, ipc, and key. See the “Usage Guidelines” section for additional
information.
ssl type Turns on SSL debugging; (optional) type valid values are alert, error,
handshake, and pkt. See the “Usage Guidelines” section for additional
information.
tcp type Turns on TCP debugging; (optional) type valid values are event, packet,
state, and timers. See the “Usage Guidelines” section for additional
information.
Release Modification
Cisco IOS Release
12.1(13)E and
SSL Services Module
Release 1.1(1)
Support for this command was introduced on the Catalyst 6500 series
switches.
CSM-S release 1.1(1) This command was introduced.