Filter
Top Products
2-55
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 2 Content Switching Module with SSL Commands
probe
When configuring Global Server Load Balancing (GSLB) type probes, the port submode command is
not used to specify which destination UDP port to query. Use the CSM environment variable
GSLB_KALAP_UDP_PORT instead. The default is port 5002.
To specify probe frequency and the number of retries for KAL-AP, ICMP, HTTP, and DNS probes when
associated with a GSLB server farm environment, the following variables must be used instead of the
probe configuration submode commands:
GSLB_KALAP_PROBE_FREQ 10
GSLB_KALAP_PROBE_RETRIES 3
GSLB_ICMP_PROBE_FREQ 10
GSLB_ICMP_PROBE_RETRIES 3
GSLB_HTTP_PROBE_FREQ 10
GSLB_HTTP_PROBE_RETRIES 2
GSLB_DNS_PROBE_FREQ 10
GSLB_DNS_PROBE_RETRIES 3
Examples This example shows how to configure an HTTP probe named TREADER:
Cat6k-2(config-module-csm)# probe TREADER http
Related Commands probe
show module csm probe