Filter
Top Products
3-62
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 3 Commands Specific to the Content Switching Module with SSL
ssl-proxy policy tcp
These examples show how to set a given command to its default value:
ssl-proxy (config-tcp-policy)# default timeout fin-wait
ssl-proxy (config-tcp-policy)# default inactivity-timeout
ssl-proxy (config-tcp-policy)# default buffer-share rx
ssl-proxy (config-tcp-policy)# default buffer-share tx
ssl-proxy (config-tcp-policy)# default mss
ssl-proxy (config-tcp-policy)# default timeout syn
ssl-proxy (config-tcp-policy)#
This example shows how to define the FIN-wait timeout in seconds:
ssl-proxy (config-tcp-policy)# timeout fin-wait 200
ssl-proxy (config-tcp-policy)#
This example shows how to define the inactivity timeout in seconds:
ssl-proxy (config-tcp-policy)# timeout inactivity 300
ssl-proxy (config-tcp-policy)#
This example shows how to define the maximum size for the receive buffer configuration:
ssl-proxy (config-tcp-policy)# buffer-share rx 16384
ssl-proxy (config-tcp-policy)#
This example shows how to define the maximum size for the transmit buffer configuration:
ssl-proxy (config-tcp-policy)# buffer-share tx 13444
ssl-proxy (config-tcp-policy)#
This example shows how to define the maximum size for the TCP segment:
ssl-proxy (config-tcp-policy)# mss 1460
ssl-proxy (config-tcp-policy)#
This example shows how to define the initial connection (SYN)-timeout value:
ssl-proxy (config-tcp-policy)# timeout syn 5
ssl-proxy (config-tcp-policy)#
This example shows how to define the reassembly-timeout value:
ssl-proxy (config-tcp-policy)# timeout reassembly 120
ssl-proxy (config-tcp-policy)#
Related Commands show ssl-proxy policy