Filter
Top Products
2-114
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 2 Content Switching Module with SSL Commands
show module csm dfp
show module csm dfp
To display DFP agent and manager information, such as passwords, timeouts, retry counts, and weights,
use the show module csm dfp command.
show module csm slot dfp [agent [detail | ip-address port] | manager [ip_addr] | detail | weights]
Syntax Description
Defaults If no options are specified, the command displays summary information.
Command Modes Privileged EXEC
Command History
Examples This example shows all available DFP data:
Cat6k-2# show module csm 4 dfp detail
This example shows information about weights:
Cat6k-2# show module csm 4 dfp weights
This example, with no options specified, shows summary information:
Cat6k-2# show module csm 4 dfp
slot Slot where the CSM resides.
agent (Optional) Specifies information about a DFP agent.
detail (Optional) Specifies all data available.
ip_address (Optional) Agent IP address.
port (Optional) Agent port number.
manager (Optional) Specifies the agent and manager connection state and statistics,
and the load and health metric sent to DFP manager.
ip_addr (Optional) IP address of reported weights.
detail (Optional) Specifies all data available.
weights (Optional) Specifies information about weights assigned to real servers for
load balancing.
Release Modification
CSM release 1.1(1) This command was introduced as show ip slb dfp.
CSM release 2.1(1) Added the virtual server weight display information to report to the
DFP manager.
This command was changed to show module csm slot (for ip slb
mode rp only).
CSM-S release 1.1(1) This command was introduced.