Filter
Top Products
2-43
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 2 Content Switching Module with SSL Commands
maxconns (owner submode)
maxconns (owner submode)
To configure the maximum number of concurrent connections allowed for an owner object, use the
maxconns command in owner configuration submode. To remove the maximum connections from the
owner configuration, use the no form of this command.
maxconns number
no maxconns
Syntax Description
Defaults This command has no default settings.
Command Modes Module CSM configuration submode
Command History
Usage Guidelines When the maximum number of connections is reached, the connections are reset and the CSM does not
accept further connections.
Examples This example shows how to configure an owner object:
Cat6k-2(config-owner)# maxconns 300
Related Commands billing-info (owner submode)
contact-info (owner submode)
owner
number The number of maximum connections to the owner object.
Release Modification
CSM release 3.1(1) This command was introduced.
CSM-S release 1.1(1) This command was introduced.