Filter
Top Products
2-168
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 2 Content Switching Module with SSL Commands
inservice (virtual server submode)
inservice (virtual server submode)
To enable the virtual server for load balancing, use the inservice command in the SLB virtual server
configuration submode. To remove the virtual server from service, use the no form of this command.
inservice
no inservice
Syntax Description This command has no keywords or arguments.
Defaults The virtual server is not in service.
Command Modes SLB virtual server configuration submode
Command History
Examples This example shows how to enable a virtual server for load balancing:
Cat6k-2(config-slb-vserver)# inservice
Related Commands advertise (virtual server submode)
show module csm vserver redirect
Release Modification
CSM release 1.1(1) This command was introduced.
CSM-S release 1.1(1) This command was introduced.