Filter
Top Products
3-35
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 3 Commands Specific to the Content Switching Module with SSL
show ssl-proxy natpool
show ssl-proxy natpool
To display information about the NAT pool, use the show ssl-proxy natpool command.
show ssl-proxy natpool [name]
Syntax Description
Defaults This command has no default settings.
Command Modes EXEC
Command History
Examples This example shows how to display information for a specific NAT address pool that is configured on
the Content Switching Module with SSL:
ssl-proxy# show ssl-proxy natpool NP1
Start ip: 207.57.110.1
End ip: 207.57.110.8
netmask: 255.0.0.0
vlan associated with natpool: 2
SSL proxy services using this natpool:
S2
S3
S1
S6
Num of proxies using this natpool: 4
ssl-proxy#
Related Commands ssl-proxy natpool
name (Optional) NAT pool name.
Release Modification
Cisco IOS Release
12.1(13)E and
SSL Services Module
Release 1.1(1)
Support for this command was introduced on the Catalyst 6500 series
switches.
CSM-S release 1.1(1) This command was introduced.