Filter
Top Products
3-51
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 3 Commands Specific to the Content Switching Module with SSL
ssl-proxy natpool
ssl-proxy natpool
To define a pool of IP addresses, which the Content Switching Module with SSL uses for implementing
the client NAT, use the ssl-proxy natpool command.
ssl-proxy natpool nat-pool-name start-ip-addr {netmask netmask}
Syntax Description
Defaults This command has no default settings.
Command Modes Global configuration
Command History
Examples This example shows how to define a pool of IP addresses:
ssl-proxy (config)# ssl-proxy natpool NP2 207.59.10.01 207.59.10.08 netmask 255.0.0.0
ssl-proxy (config)#
Related Commands show ssl-proxy natpool
nat-pool-name NAT pool name.
start-ip-addr Specifies the first IP address in the pool.
netmask netmask Netmask; see the “Usage Guidelines” section for additional information.
Release Modification
Cisco IOS Release
12.1(13)E and
SSL Services Module
Release 1.1(1)
Support for this command was introduced on the Catalyst 6500 series
switches.
CSM-S release 1.1(1) This command was introduced.