Filter
Top Products
3-63
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 3 Commands Specific to the Content Switching Module with SSL
ssl-proxy policy url-rewrite
ssl-proxy policy url-rewrite
To enter the URL rewrite configuration submode, use the ssl-proxy policy url-rewrite command. In
URL rewrite configuration submode, you can define the URL-rewrite content policy that is applied to
the payload.
ssl-proxy policy url-rewrite url-rewrite-policy-name
Syntax Description
Defaults This command has no arguments or keywords.
Command Modes Global configuration
Command History
Usage Guidelines URL rewrite allows you to rewrite redirection links only.
A URL rewrite policy consists of up to 32 rewrite rules for each SSL proxy service.
Table 3-6 lists the commands that are available in proxy-policy configuration submode.
url-rewrite-policy-name URL rewrite policy name.
Release Modification
SSL Services Module
Release 2.1(1)
Support for this command was introduced on the Catalyst 6500 series
switches.
CSM-S release 1.1(1) This command was introduced.
Table 3-6 Proxy-policy Configuration Submode Command Descriptions
default Sets a command to its default settings.
exit Exits from proxy-policy configuration submode.
help Provides a description of the interactive help system.
[no] url url-string[clearport port-number |
sslport port-number]
Allows you to configure the URL string to be rewritten. Use the no form of
this command to remove the policy.
url-string Specifies the host portion of the URL link to be rewritten; it can have a
maximum of 251 characters. You can use the “*” wildcard only as a prefix
or a suffix of a hostname in a rewrite rule. For example, you can use the
hostname in one of the following ways:
• www.cisco.com
• *.cisco.com
• wwwin.cisco.*