Filter
Top Products
2-187
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 2 Content Switching Module with SSL Commands
vlan (virtual server submode)
vlan (virtual server submode)
To define which source VLANs may access the virtual server, use the vlan command in the SLB virtual
server submode. To remove the VLAN, use the no form of this command.
vlan vlan-number local
no vlan
Syntax Description
Defaults The default is all VLANs.
Command Modes SLB virtual server configuration submode
Command History
Usage Guidelines The VLAN must correspond to an SLB VLAN previously created with the vlan command.
Examples This example shows how to specify a VLAN for virtual server access:
Cat6k-2(config-slb-vserver)# vlan 5
Related Commands show module csm vserver redirect
show module csm vlan
vlan (virtual server submode)
vlan-number VLAN that the virtual server may access.
local Allows the virtual server to accept connections from the SSL
daughter card.
Release Modification
CSM release 2.1(1) This command was introduced.
CSM-S release 1.1(1) This command was introduced.