Filter
Top Products
2-173
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 2 Content Switching Module with SSL Commands
replicate csrp (virtual server submode)
replicate csrp (virtual server submode)
To enable connection redundancy, use the replicate csrp command in the SLB virtual server
configuration submode. To disable connection redundancy, use the no form of this command.
replicate csrp {sticky | connection}
no replicate csrp {sticky | connection}
Syntax Description
Defaults Connection redundancy is disabled.
Command Modes SLB virtual server configuration submode
Command History
Usage Guidelines Sticky and connection replication can be enabled or disabled separately. For replication to occur, you
must enable SLB fault tolerance with the ft group command.
Examples This example shows how to enable connection redundancy:
Cat6k-2(config-slb-vserver)# replicate csrp connection
Related Commands advertise (virtual server submode)
show module csm vserver redirect
sticky Replicates the sticky database to the backup CSM.
connection Replicates connections to the backup CSM.
Release Modification
CSM release 2.1(1) This command was introduced.
CSM-S release 1.1(1) This command was introduced.