Filter
Top Products
2-45
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 2 Content Switching Module with SSL Commands
client-group (policy submode)
client-group (policy submode)
To associate an access list with a policy, use the client-group command in SLB policy configuration
submode. To remove an access list from a policy, use the no form of this command.
client-group {1–99 | std-access-list-name}
no client-group
Syntax Description
Defaults This command has no default settings.
Command Modes SLB policy configuration submode
Command History
Usage Guidelines Only client groups that you create with the ip access-list standard command can be associated with an
SLB policy. You can only associate one client group with a given SLB policy.
Examples This example shows how to configure a client group:
Cat6k-2(config-slb-policy)# client-group 44
Cat6k-2(config-slb-policy)# exit
Related Commands ip access-list standard
policy
show module csm owner
1–99 Standard IP access list number.
std-access-list-name Standard access list name.
Release Modification
CSM release 1.1(1) This command was introduced.
CSM-S release 1.1(1) This command was introduced.