Filter
Top Products
2-61
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 2 Content Switching Module with SSL Commands
failed (probe submode)
failed (probe submode)
To set the time to wait before probing a failed server, use the failed command in the SLB probe
configuration submode. To reset the time to wait before probing a failed server to default, use the no
form of this command.
failed failed-interval
no failed
Syntax Description
Defaults The default value for the failed interval is 300 seconds.
Command Modes SLB probe configuration submode
Command History
Usage Guidelines This command is used for all probe types.
Examples This example shows how to configure a failed server probe for 200 seconds:
Cat6k-2(config-slb-probe-http)# failed 200
Related Commands probe
show module csm probe
failed-interval Specifies the interval in seconds before the probe retires a failed
server; the range is from 2 to 65535.
Release Modification
CSM release 1.1(1) This command was introduced.
CSM-S release 1.1(1) This command was introduced.