Filter
Top Products
2-161
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 2 Content Switching Module with SSL Commands
static (sticky submode)
static (sticky submode)
To add a static sticky entry, use the static command. To remove a sticky group, use the no form of this
command.
static client source ip-address [destination ip-address] real ip-address
static cookie value real ip-address
static ssl id real ip-address
no static
Syntax Description
Defaults This command has no default settings.
Command Modes Sticky configuration submode
Command History
Examples This example shows how to create an IP sticky group:
Cat6k-2(config-module-csm)# sticky 5 netmask 255.255.255.255 timeout 20
Cat6k-2(config-slb-sticky-ip)#
Related Commands show module csm sticky
sticky
sticky (virtual server submode)
sticky-group (policy submode)
client source ip-address Identifies the client source for thte sticky entry.
destination ip-address (Optional) Specifies the destination IP address.
real ip-address Identifies the real server.
cookie value Identifies the cookie.
ssl id Identifies SSL.
Release Modification
CSM release 3.2(1) This command was introduced.
CSM-S release 1.1(1) This command was introduced.