Filter
Top Products
2-52
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 2 Content Switching Module with SSL Commands
sticky-group (policy submode)
sticky-group (policy submode)
To associate a sticky group and the sticky group attributes to the policy, use the sticky-group command in
the SLB policy configuration submode. To remove the sticky group from the policy, use the no form of
this command.
sticky-group group-id
no sticky-group
Syntax Description
Defaults The default is 0, which means that no connections are sticky.
Command Modes SLB policy configuration submode
Command History
Usage Guidelines The group-id value must match the ID specified in the sticky command; the range is from 1 to 255.
Examples This example shows how to configure a sticky group:
Cat6k-2(config-module-csm)# policy policy1
Cat6k-2(config-slb-policy)# sticky-group 5
Related Commands policy
show module csm owner
show module csm sticky
sticky
group-id ID of the sticky group to be associated with a policy.
Release Modification
CSM release 1.1(1) This command was introduced.
CSM-S release 1.1(1) This command was introduced.