Filter
Top Products
2-2
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 2 Content Switching Module with SSL Commands
arp
arp
To configure a static ARP entry, use the arp command. To remove the static ARP entry from the
configuration, use the no form of this command.
arp ip_address mac-address vlan id
no arp ip_address
Syntax Description
Defaults This command has no default settings.
Command Modes CSM configuration submode
Command History
Examples This example shows how to configure a static ARP entry:
Router(config-module-csm)# arp 1.1.1.1 0123.4567.89ab vlan 3
ip_address IP address that you want associate with the ARP entry.
mac-address MAC address of the host.
vlan id Identifies the VLAN.
Release Modification
CSM release 3.2(1) This command was introduced.
CSM-S release 1.1(1) This command was introduced.