Filter
Top Products
2-87
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 2 Content Switching Module with SSL Commands
ssl (redirect virtual server submode)
ssl (redirect virtual server submode)
To redirect an HTTP request to either HTTPS (SSL) or the FTP service, use the ssl command in the SLB
redirect virtual server configuration submode. To reset the redirect of an HTTP request to an HTTP
service, use the no form of this command.
ssl {https | ftp | ssl-port-number}
no ssl
Syntax Description
Defaults HTTP service.
Command Modes SLB redirect virtual server configuration submode
Command History
Examples This example shows how to enable SSL forwarding:
Cat6k-2(config-slb-redirect-vs)# ssl 443
Related Commands redirect-vserver (real server submode)
show module csm vserver redirect
https Specifies secure HTTP service.
ftp Specifies FTP service.
ssl-port-number SSL port number; the range is from 1 to 65535.
Release Modification
CSM release 1.1(1) This command was introduced.
CSM-S release 1.1(1) This command was introduced.