Filter
Top Products
2-112
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 2 Content Switching Module with SSL Commands
show module csm conns
show module csm conns
To display active connections, use the show module csm conns command.
show module csm slot conns [vserver virtserver-name] [client ip-address] [detail]
Syntax Description
Defaults If no options are specified, the command displays output for all active connections.
Command Modes Privileged EXEC
Command History
Usage Guidelines The following connection state definitions are displayed in the output of this command.
slot Slot where the CSM resides.
conns Specifies the connections.
vserver (Optional) Specifies the connections associated with a particular
virtual server.
virtserver-name (Optional) Name of the virtual server to be monitored.
client (Optional) Specifies the connections associated with a particular
client IP address.
ip-address (Optional) IP address of the client to be monitored.
detail (Optional) Specifies detailed connection information.
Release Modification
CSM release 1.1(1) This command was introduced as show ip slb conns.
CSM release 2.1(1) This command was changed to show module csm slot (for ip slb
mode rp only).
CSM-S release 1.1(1) This command was introduced.
State Explanation
INIT No TCP state available, but session received.
CLOSING Received both client and server FINs, waiting for ACK of last FIN.
ESTAB Client and server side connections established, balance decision made
Non-TCP flows immediately transition to this state.
SYNCLINET Client sent SYN, the CSM has sent SYN_ACK, waiting for ACK.
SYNBOTH Client side connection established, sent SYN to server.
FINCLIENT Received a FIN from client, waiting for server FIN.
FINSERVER Received a FIN from server, waiting for client FIN.