Filter
Top Products
2-155
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 2 Content Switching Module with SSL Commands
real (static NAT submode)
real (static NAT submode)
To specify the address for a real server or the subnet mask for multiple real servers performing server
NAT, use the real command in SLB static NAT configuration submode. To remove the address of a real
server or the subnet mask of multiple real servers so they are no longer performing NAT, use the no form
of this command.
real real-ip-address [real-netmask]
no real real-ip-address [real-netmask]
Syntax Description
Defaults This command has no default settings.
Command Modes SLB static NAT configuration submode
Command History
Examples This example shows how to specify the address for a real server:
Cat6k-2(config-slb-static)# real 10.0.0.0 255.0.0.0
Related Commands show module csm static
static
real-ip-address Real server IP address performing NAT.
real-netmask (Optional) Range of real servers performing NAT. If not specified,
the default is 255.255.255.255 (a single real server).
Release Modification
CSM release 1.1(1) This command was introduced.
CSM-S release 1.1(1) This command was introduced.