Filter
Top Products
2-37
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 2 Content Switching Module with SSL Commands
variable (module CSM submode)
variable (module CSM submode)
To specify the environmental variables in the configuration, use the variable command. To remove a
environmental variables from the configuration, use the no form of this command.
variable name value
no variable name
Syntax Description
Defaults This command has no default settings.
Command Modes Module CSM configuration submode
Command History
Usage Guidelines This table lists the environmental values used by the CSM.
name Specifies a name string for the variable.
value Specifies a value string for the variable.
Release Modification
CSM release 4.2(1) Added MAX_VSERVERS_PER_VIP; increased
ROUTE_UNKNOWN_FLOW_PKTS value to 2 for SYN packets.
CSM release 4.1(1) This command was introduced.
CSM-S release 1.1(1) This command was introduced.
Name Default Valid Values Description
ARP_INTERVAL 300 Integer (15 to 31536000) Time (in seconds) between ARP
requests for configured hosts.
ARP_LEARNED_INTERVAL 14400 Integer (60 to 31536000) Time (in seconds) between ARP
requests for learned hosts.
ARP_GRATUITOUS_INTERVAL 15 Integer (10 to 31536000) Time (in seconds) between
gratuitous ARP requests.
ARP_RATE 10 Integer (1 to 60) Seconds between ARP retries.
ARP_REPLY_FOR_NO_INSERVICE_VIP 0 0 Integer (0 to 1).
ARP_RETRIES 3 Integer (2 to 15) Count of ARP attempts before
flagging a host as down.
ARP_LEARN_MODE 1 Integer (0 to 1) Indicates whether the CSM learns
MAC addresses on responses only
(0) or all traffic (1).