Filter
Top Products
2-196
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 2 Content Switching Module with SSL Commands
client-group (XML submode)
client-group (XML submode)
To allow only connections sourced from an IP address matching the client group, use the client-group
command in the SLB XML configuration submode. To remove the client group connections, use the no
form of this command.
client-group [1–99 | name]
no client-group
Syntax Description
Defaults Client group connections are removed.
Command Modes SLB XML configuration submode
Command History
Usage Guidelines When a client group is specified, only connections sourced from an IP address matching that client group
are accepted by the CSM XML configuration interface. If no client group is specified, then no source IP
address check is performed. Only one client group may be specified.
Examples This example shows how to specify a client group:
Cat6k-2(config-slb-xml)# client-group domino
Related Commands xml-config
1–99 (Optional) Client group number.
name (Optional) Name of the client group.
Release Modification
CSM release 3.1(1) This command was introduced.
CSM-S release 1.1(1) This command was introduced.