Filter
Top Products
3-38
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 3 Commands Specific to the Content Switching Module with SSL
show ssl-proxy service
show ssl-proxy service
To display information about the configured SSL virtual service, use the show ssl-proxy service
command.
show ssl-proxy service [name]
Syntax Description
Defaults This command has no default settings.
Command Modes EXEC
Command History
Examples This example shows how to display all SSL virtual services that are configured on the Content Switching
Module with SSL:
ssl-proxy# show ssl-proxy service
Proxy Service Name Admin Operation Events
status status
S2 up up
S3 up up
S1 up up
S6 down down
ssl-proxy#
This example shows how to display a specific SSL virtual service that is configured on the Content
Switching Module with SSL:
ssl-proxy# show ssl-proxy service S6
Service id: 0, bound_service_id: 256
Virtual IP: 10.10.1.104, port: 443
Server IP: 10.10.1.100, port: 80
Virtual SSL Policy: SSL1_PLC
rsa-general-purpose certificate trustpoint: tptest
Certificate chain for new connections:
Server Certificate:
Key Label: tptest
Serial Number: 01
Root CA Certificate:
Serial Number: 00
Certificate chain complete
Admin Status: up
Operation Status: down
name (Optional) Service name.
Release Modification
Cisco IOS Release
12.1(13)E and SSL Services
Module Release 1.1(1)
Support for this command was introduced on the Catalyst 6500 series
switches.
CSM-S release 1.1(1) This command was introduced.