Filter
Top Products
3-46
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 3 Commands Specific to the Content Switching Module with SSL
show ssl-proxy vlan
show ssl-proxy vlan
To display VLAN information, use the show ssl-proxy vlan command.
show ssl-proxy vlan [vlan-id | debug]
Syntax Description
Defaults This command has no default settings.
Command Modes EXEC
Command History
Examples This example shows how to display all the VLANs that are configured on the Content Switching Module
with SSL:
ssl-proxy# show ssl-proxy vlan
VLAN index 2 (admin VLAN)
IP addr 10.1.1.1 NetMask 255.0.0.0 Gateway 10.1.1.5
Network 10.1.1.2 Mask 255.0.0.0 Gateway 10.1.1.6
VLAN index 3
IP addr 10.1.1.3 NetMask 255.0.0.0 Gateway 10.1.1.6
VLAN index 6
IP addr 10.1.1.4 NetMask 255.0.0.0
ssl-proxy#
Related Commands ssl-proxy vlan
vlan-id (Optional) VLAN ID. Displays information for a specific VLAN; valid
values are from 1 to 1005.
debug (Optional) Displays debug information.
Release Modification
Cisco IOS Release
12.1(13)E and
SSL Services Module
Release 1.1(1)
Support for this command was introduced on the Catalyst 6500 series
switches.
CSM-S release 1.1(1) This command was introduced.