Filter
Top Products
2-192
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 2 Content Switching Module with SSL Commands
gateway (VLAN submode)
gateway (VLAN submode)
To configure a gateway IP address, use the gateway command in the SLB VLAN configuration
submode. To remove the gateway from the configuration, use the no form of this command.
gateway ip-address
no gateway ip-address
Syntax Description
Defaults This command has no default settings.
Command Modes SLB VLAN configuration submode
Command History
Usage Guidelines You can configure up to 7 gateways per VLAN with a total of up to 255 gateways for the entire system.
A gateway must be in the same network as specified in the ip address SLB VLAN command.
Examples This example shows how to configure a client-side gateway IP address:
Cat6k-2(config-slb-vlan-client)# gateway 130.21.34.56
Related Commands ip address (VLAN submode) (SLB VLAN configuration submode)
show module csm vlan
vlan (virtual server submode)
ip-address IP address of the client-side gateway.
Release Modification
CSM release 1.1(1) This command was introduced for client VLANs.
CSM release 2.1(1) This command is now available for both client and server VLANs.
CSM-S release 1.1(1) This command was introduced.