Filter
Top Products
3-65
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 3 Commands Specific to the Content Switching Module with SSL
ssl-proxy pool ca
ssl-proxy pool ca
To enter the certificate authority pool configuration submode, use the ssl-proxy pool ca command. In
the certificate authority pool configuration submode, you can configure a certificate authority pool,
which lists the CAs that the module can trust.
ssl-proxy pool ca-pool-name
Syntax Description
Defaults This command has no arguments or keywords.
Command Modes Global configuration
Command History
Usage Guidelines Enter each certificate-authority pool configuration submode command on its own line.
Table 3-7 lists the commands that are available in certificate-authority pool configuration submode.
Examples This example shows how to add a certificate-authority trustpoint to a pool:
ssl-proxy (config)# ssl-proxy pool test1
ssl-proxy(config-ca-pool)# ca trustpoint test20
ssl-proxy(config-ca-pool)#
ca-pool-name Certificate authority pool name.
Release Modification
SSL Services Module
Release 2.1(1)
Support for this command was introduced on the Catalyst 6500 series
switches.
CSM-S release 1.1(1) This command was introduced.
Table 3-7 Proxy-policy TCP Configuration Submode Command Descriptions
ca Configures a certificate authority. The available subcommand is as follows:
trustpoint ca-trustpoint-name—Configures a certificate-authority trustpoint.
Use the no form of this command to return to the default setting.
default Sets a command to its default settings.
exit Exits from proxy-service configuration submode.
help Allows you to configure the connection-establishment timeout; valid values are
from 5 to 75 seconds. Use the no form of this command to return to the default
setting.