Command Groups 108
Radius
traffic-shape
Specifies the maximum transmission
bandwidth limit for the interface as a whole.
GC or
IC
a. For the meaning of each Mode abbreviation, see
Mode Types
on page 81.
Command Description Mode
a
aaa accounting dot1x
default start-stop
Creates an accounting method list GC
accounting
Applies an accounting method to a line
config.
LC
acct-port
Sets the port that connects to the RADIUS
accounting server.
R
auth-port Sets the port number for authentication requests
of the designated radius server
.
R
deadtime
Improves Radius response times when a server is
unavailable by causing the unavailable server to
be skipped.
R
debug aaa accounting
Enables debugging for accounting. PE
key Sets the authentication and encryption key for all
RADIUS communications between the switch
and the RADIUS daemon
.
R
msgauth
Enables the message authenticator attribute to
be used for the RADIUS Authenticating server
being configured.
R
name (RADIUS server)
Assigns a name to a RADIUS server. R
primary
Specifies that a configured server should be the
primary server in the group of authentication
servers which have the same server name.
R
priority
Specifies the order in which the servers are to be
used, with 0 being the highest priority.
R
radius-server attribute 4
Sets the network access server (NAS) IP address
for the RADIUS server.
GC
Command Description Mode
a
2CSPC4.X8100-SWUM102.book Page 108 Friday, March 15, 2013 8:56 AM