240 AAA Commands
aaa authentication dot1x default
Use the aaa authentication dot1x default command in Global Configuration
mode to specify an authentication method for 802.1x clients. Use the no form
of the command to return the authentication method to its default settings.
aaa authentication dot1x default does not support the local method. This is
true for all switches using the 4.1.x.x or later firmware.
Syntax
aaa authentication dot1x default {radius| ias|local|none}
no aaa authentication dot1x default
Parameter Description
Default Configuration
No default authentication method is defined.
aaa authorization ip http authentication show authentication
methods
aaa authorization network
default radius
ip https authentication show users accounts
aaa ias-user username login authentication show users login-history
aaa new-model password (aaa IAS User
Configuration)
username
Parameter Description
radius Uses the list of all authentication servers for authentication.
ias Uses the internal authentication server. Only EAP-MD5
authentication is supported for the internal authentication
server.
local Use the local authentication method.
none Uses no authentication.
2CSPC4.X8100-SWUM102.book Page 240 Friday, March 15, 2013 8:56 AM